M2M Cellular Gateway
Dynamic Routing Setting
The dynamic routing setting allows user to customize RIP, OSPF, and BGP protocol through the
router based on their office setting.
Go to Basic Network > Routing > Dynamic Routing Tab
Item
Value setting
Enable Dynamic
The box is unchecked by
Routing function
default
The RIP configuration setting allows user to customize RIP protocol through the router based on
.
their office setting
Item
Value setting
Enable RIP
Disable is set by default
Index skipping is used to reserve slots for new function insertion, when required.
Description
Check the Enable box to activate this function
Description
Select Disable will disable RIP protocol.
Select RIP v1 will enable RIPv1 protocol.
Select RIP v2 will enable RIPv2 protocol.
121