M2M Cellular Gateway
receive the managing events and if the gateway will issue alerting SMS messages upon events
happened. In the "Managing Event List" and "Notified Event List" windows, there are managing events
and notified events to be selected to enable gateway to execute corresponding actions and make
responses once selected events happened. At last, the sixth window is "Access Control Configuration"
window. Administrator can enable the access control here to specify only some defined phone numbers
can communicate with the gateway via the SMS system. In the "Specific Phone Number Definition"
window, for each phone number administrator can further specify the SMS messaging access control.
From which phone number the gateway will receive the management SMS messages or to which phone
the gateway can issue the notification SMS messages.
A SMS‐based Remote Management Scenario
Scenario Application Timing
When the administrator wants to uses a SMS message to drive his remote cellular
gateway to make an action and to receive a response when done, the scenario is
adequate for the application. Following example is the reboot request to the cellular
gateway.
Scenario Description
The mobile administrator sends a reboot SMS with a prefix code of security key to the
cellular gateway.
The cellular gateway replies with a confirmation SMS and then tries to reboot itself.
Parameter Setup Example
Following tables list the parameter configuration as an example for "SMS‐based Remote
Management" function, as shown in above diagram.
Index skipping is used to reserve slots for new function insertion, when required.
322