M2M Cellular Gateway
3.1.1 Physical Interface
The first step to configure one WAN interface is to specify which kind of connection media to be
used for the WAN connection, as shown in "Physical Interface" page.
In "Physical Interface" page, there are two configuration windows, "Physical Interface List" and
"Interface Configuration". "Physical Interface List" window shows all the available physical interfaces.
After clicking on the "Edit" button for the interface in "Physical Interface List" window the "Interface
Configuration" window will appear to let you configure a WAN interface.
Physical Interface List
The Physical Interface List shows all WAN interfaces of the gateway device, including their name,
what kinds of physical interface, their operation mode and line speed. There is one "Edit" button for
each WAN interface, which can let you configure the interface. Please see "Interface Configuration"
section beneath. Following are some "Physical Interface List" window examples for different gateway
products.
Index skipping is used to reserve slots for new function insertion, when required.
53