M2M Cellular Gateway
Item
Value setting
1. A must fill setting
IKE Version
2. v1 is selected by
default
Main Mode is set by
Negotiation Mode
default default
None is selected by
X‐Auth
default
1. Unchecked by
default
Dead Peer
2. Default Timeout
Detection (DPD)
180s and
Delay 30s
1. A Must fill setting
Phase1 Key Life
2. Default 3600s
Time
3. Max. 86400s
IKE Proposal Definition Window
Item
Value setting
IKE Proposal
A Must fill setting
Definition
Index skipping is used to reserve slots for new function insertion, when required.
Description
Specify the IKE version for this IPSec tunnel. Select v1 or v2
Note: IKE versions will not be available when Dynamic VPN option in Tunnel
Scenario is selected, or AH option in Encapsulation Protocol is selected.
Specify the Negotiation Mode for this IPSec tunnel. Select Main Mode or
Aggressive Mode.
Specify the X‐Auth role for this IPSec tunnel. Select Server, Client, or None.
Selected None no X‐Auth authentication is required.
Selected Server this gateway will be an X‐Auth server. Click on the X‐Auth Account
button to create remote X‐Auth client account.
Selected Client this gateway will be a X‐Auth client. Enter User name and Password
to be authenticated by the X‐Auth server gateway.
Note: X‐Auth Client will not be available for Dynamic VPN option selected in Tunnel
Scenario.
Click Enable box to enable DPD function. Specify the Timeout and Delay time in
seconds.
Specify the Phase1 Key Life Time
Description
Specify the Phase 1 Encryption method. AES‐
auto/AES128/AES192/AES256/DES/3DES
Specify the Authentication method.
None/MD5/SHA1/SHA2‐256/SHA2‐512
Specify the DH Group
None/Group1/ Group2/ Group5/ Group14/ Group15/ Group16/ Group17/
Group18/
Check Enable box to enable this setting
197