Table of Contents
Advertisement
M2M Cellular Gateway
Index skipping is used to reserve slots for new function insertion, when required.
1.6.4 Connecting to the Network or a Host
The IDG500 series provides one RJ45 port to connect 10/100Mbps Ethernet. It can auto detect
the transmission speed on the network and configure itself automatically. Connect one
Ethernet cable to the RJ45 port (LAN) of the device and plug another end of the Ethernet cable
into your computer's network port. In this way, you can use the RJ45 Ethernet cable to connect
the IDG500 series to the host PC's Ethernet port for configuring the device.
1.6.5 Setup by Configuring WEB UI
You can browse web UI to configure the device. First you need to launch the Setup Wizard browser and
then the Setup Wizard will guide you step‐by‐step to finish the setup process.
Browse to Activate the Setup Wizard
3
Type in the IP Address (http://192.168.123.254)
4
When you see the login page, type the password 'admin'
and then click 'Login' button.
3 The default LAN IP address of this gateway is 192.168.123.254. If you change it, you need to login by
using the new IP address.
4 It's strongly recommending you to change this login password from default value
13
Advertisement
Table of Contents
