M2M IDG500AM-0T001 User Manual page 223

M2M Cellular Gateway
L2TP Server Configuration
Item Value setting
The box is
L2TP
unchecked by
default
Client/Server
A Must filled setting
The box is
L2TP Server
unchecked by
default
The box is
L2TP over IPSec
unchecked by
default
Server Virtual IP
A Must filled setting
IP Pool Starting
A Must filled setting
Address
IP Pool Ending
A Must filled setting
Address
Authentication
A Must filled setting
Protocol
MPPE Encryption
A Must filled setting
Service Port
A Must filled setting
Save
N/A
Undo
N/A
L2TP Server Status
Item Value setting
L2TP Server Status
N/A
Index skipping is used to reserve slots for new function insertion, when required.
Description
When click the Enable box
It will activate L2TP functions.
Specify the role of L2TP.
Selected Server
‐>Set as a L2TP server and jump to server configuration page
Selected Client
‐>Set as a L2TP client and jump to client configuration page
When click the Enable box
It will active L2TP server
When click the Enable box.
It will enable L2TP over IPSec and need to fill in the Pre‐shared Key.
Specify the L2TP server Virtual IP
It will set as this L2TP server local virtual IP
Specify the L2TP server starting IP of virtual IP pool
It will set as the starting IP which assign to L2TP client
Specify the L2TP server ending IP of virtual IP pool
It will set as the ending IP which assign to L2TP client
Specify the Authentication Protocol which this L2TP server allowed.
Selected PAP/CHAP/MS‐CHAP/MS‐CHAPv2
‐>It will as the authentication protocol which the box be click.
Specify the MPPE Protocol which this L2TP server allowed.
When Click the Enable box
‐>It will enable MPPE
Selected 40 bits/56 bits/128 bits
‐>It will as the MPPE encryption which be choose.
Note_1: If Enable box is be clock, Authentication Protocol PAP/CHAP will be
available.
Specify the Service Port which L2TP server use.
Click the Save button to save the configuration.
Click the Undo button to recovery the configuration.
Description
Show the L2TP client information which connect to this L2TP server.
Click the Refresh button to renew the L2TP client information.
223