Table of Contents
Advertisement
M2M Cellular Gateway
Create/Edit Notifying Events Rules
Setup your Notifying Event rules. It supports up to a maximum of 128 rules.
When Add button is applied, the Notifying Event Configuration screen will appear.
Notifying Event Configuration
Item
Value setting
Event
DI‐1 (or WAN) by default
Handlers
All box is unchecked by
default.
Notifying
The box is unchecked by
Events Enable
default.
Save
NA
Index skipping is used to reserve slots for new function insertion, when required.
Description
Specify the Event type and event condition.
Select DI‐1 and select the event condition to specify DI‐1 Event;
Select Power‐1 and select the event condition to specify Power‐1 Event;
Select WAN and select the event condition to specify WAN Event;
Select LAN&VLAN and select the event condition to specify LAN&VLAN
Event;
Select WiFi and select the event condition to specify WiFi Event;
Select Client&Server&Proxy and select the event condition to specify
Client&Server&Proxy Event;
Select System Related and the event condition to specify System Related
Event.
Specify the Handlers to take reaction when the event is triggered.
Select DO Checkbox and select the profile from Digital Output (DO) Profile
List to specify DO Handlers;
Select SMS to specify the SMS Handler;
Select Web Log and select/unselect the Enable Checkbox to specify the Web
Log Handler;
Select SNMP Trap to specify the SNMP Trap Handler;
Select Email and select the profile from Email Definition to specify the Email
Handler;
Select Modbus and select profile from Modbus Definition to specify the
Modbus Handler.
Click Enable box to activate this Notifying Event setting.
Click the Save button to save the configuration
328
Advertisement
Table of Contents
