M2M IDG500AM-0T001 User Manual page 160

M2M Cellular Gateway
Index skipping is used to reserve slots for new function insertion, when required.
their MAC addresses match to one rule. Other client hosts can connect to the gateway. In contrast,
when you choose "Deny all to pass except those match the following rules" for the "MAC Control
Rule List", you are setting the defined MAC control rules to belong to the white list. The client
hosts, listed in the rule, in the Intranet will be allowed for the connection to the gateway if their
MAC addresses match to one rule. Other client hosts can't connect to the gateway.
MAC Control Rule List
The "MAC Control Rule List" shows the setup parameters of all MAC control rules. There also be
one "Add" button at the "MAC Control Rule List" caption, that can let you add and create one new
MAC control rule. The "Edit" button at the end of each MAC control rule can let you modify the rule.
Refer to the following sub‐sections for more reference.
MAC Control Rule Configuration
When you want to add a new MAC control rule or edit one already existed, the "MAC Control Rule
Configuration" window shows up for you to configure. The parameters in a rule include the rule
name, the MAC address, the integrated time schedule rule and the rule activation. Refer to 6.2.1
Scheduling Settings section in this user manual on how to configure a time schedule. See following
scenario for example.
MAC Control with Black List Scenario
160