Table of Contents
Advertisement
M2M Cellular Gateway
Remote IP/FQDN
A Must filled setting
Remote Subnet
A Must filled setting
A Must filled setting
Authorization Mode
By default TLS is
selected.
Local Endpoint IP
A Must filled setting
Address
Remote Endpoint IP
A Must filled setting
Address
Static Key
A Must filled setting
By default Blowfish
Encryption Cipher
is selected.
By default SHA‐1 is
Hash Algorithm
selected.
The box is
Advanced
unchecked by
Configuration
default.
The box is
Tunnel
unchecked by
default
Save
N/A
Undo
N/A
Back
N/A
Index skipping is used to reserve slots for new function insertion, when required.
Select TAP for OpenVPN Client which to be.
‐> The OpenVPN will use TAP tunnel device.
Specify the Remote IP/FQDN for this OpenVPN Client tunnel.
Fill in the IP address or FQDN.
Specify Remote Subnet for this OpenVPN Client tunnel.
Filled the remote subnet address and selected remote subnet mask.
Specify Static Key/TLS for the OpenVPN Server.
Select Static Key for OpenVPN Server which to be.
‐>The OpenVPN will use static key authorization mode. The items Local Endpoint IP
Address, Remote Endpoint IP Address and Static Key will be display.
Select TLS for OpenVPN Server which to be.
‐>The OpenVPN will use TLS authorization mode. The items CA Cert., and Client
Cert. will be display. CA Cert. could be generated in Certificate. Refer to Advanced
Network > Certificate > Trusted Certificates. Client Cert. could be generated in
Certificate. Refer to Advanced Network > Certificate > My Certificates.
Specify the Local Endpoint IP Address.
Note_1: Local Endpoint IP Address will be available only when Static Key is be
chose in Authorization Mode.
Specify the Remote Endpoint IP Address.
Note_1: Remote Endpoint IP Address will be available only when Static Key is be
chose in Authorization Mode.
Specify the Static Key.
Note_1: Static Key will be available only when Static Key is be chose in
Authorization Mode.
Specify the Encryption Cipher.
Selected the Blowfish/AES‐256/AES‐192/AES‐128/None.
Specify the Hash Algorithm.
Selected the SHA‐1/MD5/MD4/SHA2‐256/SHA2‐512/None.
Specify the OpenVPN client Advanced Configuration setting.
If it is checked, Advanced Configuration will be display below.
When click Enable, it will enable this OpenVPN tunnel.
Click Save to save the settings
Click Undo to cancel the settings
Click the Back button to return the last page.
248
Advertisement
Table of Contents
