M2M Cellular Gateway
For Network‐A at HQ
Following 3 tables list the parameter configuration for above example diagram of PPTP
VPN server in Network‐A.
Use default value for those parameters that are not mentioned in these tables.
Configuration Path
PPTP
Client/Server
Configuration Path
PPTP Server
Server Virtual IP
IP Pool Starting Address
IP Pool Ending Address
Authentication Protocol
MPPE Encryption
Configuration Path
ID
User Name
Password
Account
Scenario Operation Procedure
In above diagram, Network‐A is in the headquarters, and the subnet of its Intranet is
10.0.76.0/24. The security gateway for Network‐A has the IP address of 10.0.76.2 for
LAN interface and 203.95.80.22 for WAN interface. It serves as a PPTP server.
However, Network‐B is in the mobile office and the subnet of its Intranet is
10.0.75.0/24. The security gateway for Network‐B has the IP address of 10.0.75.2 for
LAN interface and 118.18.81.33 for WAN interface. It serves as a PPTP client.
PPTP server provides two user accounts, User‐1 and User‐2, for PPTP clients dialing in.
Establish a PPTP VPN tunnel by starting from the PPTP client site. So both Intranets of
10.0.75.0/24 and 10.0.76.0/24 can securely communicate each other.
Finally, the client hosts in the Intranet of Network‐B at mobile office can access the
server or database resources in the Intranet of Network‐A at HQ in a secured link.
PPTP VPN Client Scenario
When you want the security gateway to play a PPTP client role, check the "Enable" box and
choose "Client" option in the "PPTP Configuration" window. And make its related configuration in
following sub‐sections.
PPTP Client Configuration
Index skipping is used to reserve slots for new function insertion, when required.
[PPTP]‐[Configuration]
■ Enable
Server
[PPTP]‐[PPTP Server Configuration]
■ Enable
192.168.101.253
10
(that means 192.168.101.10)
50
(that means 192.168.101.50)
MS‐CHAP
■ Enable 128 bits
[PPTP]‐[User Account Configuration]
1
User‐1
1234
■ Enable
2
User‐2
4321
■ Enable
206