M2M Cellular Gateway
port number
2. The default SNMP
port is 161
3. A Must filled
setting
Save
N/A
Undo
N/A
Create/Edit Multiple Community
The SNMP allows you to custom your access control for version 1 and version 2 user. The router
supports up to a maximum of 10 community sets.
When Add button is applied Multiple Community Rule Configuration screen will appear.
Multiple Community Rule Configuration
Item
Value setting
1. Read Only is
selected by default
2. A Must filled
Community
setting
3. String format: any
text
1.The box is checked
Enable
by default
Save
N/A
Undo
N/A
Back
N/A
Index skipping is used to reserve slots for new function insertion, when required.
You can fill in any port number. But you must ensure the port number is not to be
used.
Click Save to save the settings
Click Undo to cancel the settings
Description
Specify this version 1 or version v2c user's community that will be allowed Read
Only (GET and GETNEXT) or Read‐Write (GET, GETNEXT and SET) access
respectively.
The maximum length of the community is 32.
Click Enable to enable this version 1 or version v2c user.
Click the Save button to save the configuration. But it does not apply to SNMP
functions. When you return to the SNMP main page. It will show "Click on save
button to apply your changes" remind user to click main page Save button.
Click Undo to cancel the settings.
Click the Back button to return the last page.
264