M2M IDG500AM-0T001 User Manual page 72

Cellular gateway
Table of Contents

Advertisement

M2M Cellular Gateway 
Manually:  This  gateway  won't  start  to  establish  WAN  connection  until  you  press  "Connect" 
button on web UI. After normal data transferring between LAN and WAN sides, this gateway will 
disconnect WAN connection if idle time reaches value of Maximum Idle Time. 
Please be noted, if the WAN interface serves as the primary one for another WAN interface in 
Failover  role,  the  Connection  Control  parameter  will  not  be  available  to  you  to  configure  as  the 
system must set it to "Auto‐reconnect (Always on)". 
 Auto‐reconnect / Dial‐on‐demand / Manually Scenario: 
As an example, WAN‐1, WAN‐2 and WAN‐3 are all Ethernet interfaces with "Always on" operation 
mode. Their WAN Type is set to "Dynamic IP" but with different Connection Control approaches. 
WAN‐1  uses  "Auto‐reconnect  (Always  on)",  WAN‐2  uses  "Dial‐on‐demand"  and  WAN‐3  uses 
"Manually". Following 3 tables list the parameter configuration for these three WAN interfaces. 
Configuration Path 
Interface Name 
Physical Interface 
Operation Mode 
Line Speed 
 
Configuration Path 
Interface Name 
WAN Type 
 
Configuration Path 
Interface Name 
Connection Control 
System keeps alive the WAN connection whose connection control is "Auto-reconnect
(Always on)". After system booting up, the connection will be alive and once the
connection is down, system will re-connect it. The scenario is shown in following diagram.
 
 Index skipping is used to reserve slots for new function insertion, when required. 
[Physical Interface]‐[Interface Configuration (WAN‐n)] , n=1,2,3
WAN‐1 
Ethernet 
Always on 
100Mbps / 100Mbps
[Internet Setup]‐[Internet Connection Configuration (WAN‐n)], n=1, 2, 3 
WAN‐1 
Dynamic IP 
[Internet Setup]‐[Dynamic IP WAN Type Configuration]
WAN‐1 
Auto‐reconnect (Always on)
ISP
① Disconnected
DSLAM
② Re-connecting
Primary DNS,
Secondary DNS,
DHCP Servers
WAN‐2
Ethernet
Always on
100Mbps / 100Mbps
WAN‐2
Dynamic IP
WAN‐2
Dial‐on‐demand
Dynamic IP, 
xDSL Modem
G ateway, 
Subnet Mas k, 
Primary DN S,
Secondary DN S
WAN‐3 
Ethernet 
Always on 
100Mbps / 100Mbps
WAN‐3 
Dynamic IP 
WAN‐3 
Manually 
Gateway
Auto-reconnect
(Alw ays on)
Intranet
72 

Advertisement

Table of Contents
loading

Related Products for M2M IDG500AM-0T001

Table of Contents