Table of Contents
Advertisement
M2M Cellular Gateway
Use default value for those parameters that are not mentioned in the tables.
Configuration Path
SMS Remote Management
Physical Interface
Configuration Path
Delete Managed SMS after
Processing
Send Confirmed SMS
Security Key
Configuration Path
Managing Event List
Configuration Path
ID
Event
Enable
Configuration Path
Access Control
Configuration Path
ID
Phone Number
Granted Functions
Enable
Scenario Operation Procedure
In above diagram, the "Cellular Gateway" is configured with SMS‐based Remote
Management enabled, the security key and one dedicated phone number
(+8869116xxxxx) to manage the gateway remotely for "Reboot Device" managing event.
First, the mobile administrator with a mobile phone set (phone number: +8869116xxxxx)
sends a reboot SMS with a prefix code of security key ("1234" here) to the cellular
gateway (phone number: +8869376xxxxx).
The cellular gateway receives that SMS message, check the phone number that
message comes from, check the security key, reply a confirmation SMS to the sender,
deletes the SMS message in the queue and tries to reboot itself.
Index skipping is used to reserve slots for new function insertion, when required.
[Remote Management]‐[Configuration]
■ Enable
3G/4G‐1
[Remote Management]‐[Management Configuration]
■ Enable
■ Enable
1234
[Remote Management]‐[Event Configuration]
■ Enable
[Remote Management]‐[Managing Event List]
1
Reboot Device
■
[Remote Management]‐[Access Control Configuration]
■ Enable
[Remote Management]‐[Specific Phone Number Definition]
1
+8869116xxxxx
■ Management □ Notification
■
323
Advertisement
Table of Contents
