Table of Contents
Advertisement
M2M Cellular Gateway
VRRP Setting
T he Virtual Router Redundancy Protocol (VRRP) setting allows user to assign available Internet
Protocol (IP) routers to participating hosts automatically.
Go to Advanced Network > Redundancy > VRRP Tab
VRRP
Item
Value setting
Enable VRRP
The box is unchecked by
function
default
1. Numberic String
Virtual Server ID
Format
2. A Must filled setting
1. Numberic String
Priority of
Format
Virtual Server
2. A Must filled setting
Virtual Server IP
1. IPv4 Format
Address
2. A Must filled setting
Save
N/A
Undo
N/A
Index skipping is used to reserve slots for new function insertion, when required.
Description
Check the Enable box to activate this VRRP function
Define the Virtual Server ID on VRRP of the router. The value range is from 1 to 255.
Define the Priority of Virtual Server on VRRP of the router. The value range is from
1 to 254.
Define the Virtual Server IP Address on VRRP of the router.
Click the Save button to save the configuration
Click the Undo button to restore what you just configured back to the previous
setting. Please note that the restored setting may not be the factory default setting
but a retrieve of what was saved in the memory.
254
Advertisement
Table of Contents
