M2M Cellular Gateway
Interface Name
The logic name of WAN interfaces is identified by "WAN‐1", "WAN‐2", ..., and so on.
Physical Interface
This device is equipped with some kinds of WAN Interfaces. Please refer to [Basic Network]‐
[WAN]‐[Physical Interface] section (3.1.1).
Operation Mode
It is "Always on", "Failover" or "Disable". Please refer to [Basic Network]‐ [WAN]‐[Physical
Interface] section (3.1.1).
WAN Type
The supported WAN types for each WAN interface depend on the kind of interface.
Following are all kinds of physical interfaces and their supported WAN types.
Ethernet interface: A fixed line ISP that provides xDSL or cable modem for you to setup the
WAN connection.
Static IP Address WAN type: Select this option if ISP provides a fixed IP address to you.
You will need to enter in the IP address, subnet mask, and gateway address, provided to
you by your ISP.
Dynamic IP Address WAN type: You may choose this WAN type if you connects a cable
modem or a fiber (VDSL modem) for Internet connection. The assigned IP address for
the WAN interface by a DHCP server may be different every time.
PPP over Ethernet WAN type: As known as PPPoE. This WAN type is widely used for
ADSL connection.
PPTP WAN type: This WAN type is more popular in Russia.
L2TP WAN type: This WAN type is more popular in Israel.
3G/4G or USB 3G/4G interface: The ISP is a mobile operator that can provide LTE, HSPA+,
HSPA, WCDMA, EDGE, GPRS data services
3G/4G WAN type: If you have subscribed 3G/LTE data services from a mobile operator.
You can setup a 3G/4G WAN connection by using the gateway device. This gateway can
support LTE/3G/2G data connection based on mobile system specifications that mobile
8 Different models have different specifications of embedded 3G module. Please refer to specification file for
details.
Index skipping is used to reserve slots for new function insertion, when required.
8
.
67