M2M Cellular Gateway
IPSec Setting
The IPsec Setting allows user to create and configure IPSec tunnels. Before you proceed ensure that
the VPN is enabled and saved. To enable VPN, go to Advanced Network > VPN > Configuration tab.
Enabling IPSec
Go to Advanced Network > VPN > IPSec tab
Enable IPSec Window
Item
IPsec
NetBIOS over IPSec
NAT Traversal
Max. Concurrent
IPSec Tunnels
Save
Undo
Create/Edit IPSec tunnel
The router supports up to a maximum of 32 simultaneous IPSec tunnel connections. Ensure that the
IPSec enable box is checked to enable before we can setup IPSec.
When Add/Edit button is applied a series of configuration screen will appear.
Index skipping is used to reserve slots for new function insertion, when required.
Value setting
Description
Unchecked by
default
Unchecked by
default
Unchecked by
default
32 is set by default
N/A
N/A
Click the Enable box to enable IPSec function.
Click the Enable box to enable NetBIOS over IPSec function.
Click the Enable box to enable NAT Traversal function.
The Value specified will limit the maximum number of simultaneous IPSec tunnel
connection.
Click Save to save the settings
Click Undo to cancel the settings
193