M2M IDG500AM-0T001 User Manual page 225

M2M Cellular Gateway
When Add/Edit button is applied a series of configuration screen will appear.
L2TP Client Configuration
Item Setting Value setting
Tunnel Name
A Must filled setting
Interface
A Must filled setting
The box is
L2TP over IPSec
unchecked by
default
Remote LNS
A Must filled setting
IP/FQDN
Remote LNS Port
A Must filled setting
Username
A Must filled setting
Password
A Must filled setting
The box is
Tunneling
unchecked by
Password(Optional)
default
Default
Gateway/Remote
A Must filled setting
Subnet
Authentication
A Must filled setting
Index skipping is used to reserve slots for new function insertion, when required.
Description
When fill in the name
It will be used to identify it in the tunnel list
Define the selected interface to be the used for this L2TP tunnel
Select WAN‐1 for this IPSec tunnel using.
(WAN‐1 is available only when WAN‐1 interface is enabled)
The same applies to other WAN interfaces (i.e. WAN‐2).
When click the Enable box.
It will enable L2TP over IPSec and need to fill in the Pre‐shared Key.
Specify the Remote LNS IP/FQDN for this L2TP tunnel.
Fill in the IP address or FQDN.
Specify the Remote LNS Port for this L2TP tunnel.
Fill in the value for LNS port.
Specify the Username for this L2TP tunnel to authenticate when connect to server.
Fill in the string as username.
Specify the Password for this L2TP tunnel to authenticate when connect to server.
Specify the Tunneling Password for this L2TP tunnel to authenticate.
Specify Default Gateway/Remote Subnet for this L2TP tunnel.
Selected Default Gateway
‐>The IP address box will not be available.
Selected the Remote Subnet
‐>Filled the remote subnet address/remote subnet mask.
Specify Authentication Protocol for this L2TP tunnel will can be used.
225