Table of Contents
Advertisement
M2M Cellular Gateway
Create/Edit Virtual Server
The router allows you to custom your Virtual Server rules. The router supports up to a maximum of 20
rule‐based Virtual Server sets.
When Add button is applied Virtual Server Rule Configuration screen will appear.
Virtual Server Rule Configuration
Item
Value setting
1. A Must filled setting 2.
WAN Interface
Default is ALL.
Server IP
A Must filled setting
Protocol
A Must filled setting
Index skipping is used to reserve slots for new function insertion, when required.
Description
Define the selected interface to be the packet‐entering interface of the router.
If the packets to be filtered are coming from WAN‐x then select WAN‐x for this
field.
Select ALL for packets coming into the router from any interfaces.
It can be selected WAN‐x box when WAN‐x enabled.
This field is to specify the IP address of the interface selected in the WAN Interface
setting above.
When "ICMPv4" is selected
It means the option "Protocol" of packet filter rule is ICMPv4.
Apply Time Schedule to this rule, otherwise leave it as Always. (refer to Scheduling
setting under System)
Then check Enable box to enable this rule.
When "TCP" is selected
It means the option "Protocol" of packet filter rule is TCP.
Public Port selected a predefined port from Well‐known Service, and Private Port
is the same with Public Port number.
Public Port is selected Single Port and specify a port number, and Private Port can
be set a Single Port number.
Public Port is selected Port Range and specify a port range, and Private Port can
be selected Single Port or Port Range.
Apply Time Schedule to this rule, otherwise leave it as Always. (refer to Scheduling
96
Advertisement
Table of Contents
