Table of Contents
Advertisement
M2M Cellular Gateway
Show SIM Status
SIM Status (after Detail button)
Item
Value setting
SIM
N/A
PIN Code
N/A
Status
PIN Code
Remaining
N/A
Times
PUK Code
Remaining
N/A
Times
*To enter or re‐enter PIN code please go to Basic Network > WAN > Internet Setup > Connection
with SIM‐A Card.
Index skipping is used to reserve slots for new function insertion, when required.
Description
It displays the operating SIM card. The display can be SIM‐A or SIM‐B. Note: In some
AMIT's products, the device supports one SIM slot and only SIM‐A is available.
It displays the stutus of whether the SIM is requied to be unlocked and absent of SIM
card. The display can be Ready, SIM card not inserted, incorrect PIN code, PIN is required,
Blocked.
Ready* the PIN code is entered correctly and the SIM is unlocked.
SIM card not insert* the SIM card is not detected. Check if SIM card is inserted properly.
PIN code incorrect* the PIN code entered is incorrect.
PIN is required* the PIN code is required to unlock the SIM card.
Blocked* the SIM card is locked and need PUK code to unlock. It is probably due to the
device had exceeded the allowed number of times to unlock. Refer to PIN Code
Remaining Times
This displays the remaining time of the counter that you are allowed to try to unlock SIM
card with the PIN code*. Once the number of unlocking tries has been exhused the
counter will display zero then the SIM card is locked. You are not allowed to unlock with
the PIN code and would need to enter the PUK code to unlock instead.
Note: You will need to enquire the telecom carrier for the PUK code to unlock or further
technical services.
This displays the remaining time of the counter that you are allowed to try to unlock SIM
card with the PUK code*. Once the number of unlocking tries has been exhused the
counter will display zero then the SIM card is locked. Note: When the counter has reached
zero, you will need to enquire the telecom carrier for further technical services.
35
Advertisement
Table of Contents
