Table of Contents
Advertisement
M2M Cellular Gateway
Application Filter Rule Configuration
Item
Value setting
1. String format can be
Rule Name
any text
2. A Must filled setting
Source IP
A Must filled setting
Source MAC
A Must filled setting
All boxes are unchecked
Chat Software
by default.
All boxes are unchecked
P2P Software
by default.
All boxes are unchecked
Proxy
by default.
All boxes are unchecked
Streaming
by default.
Time Schedule
A Must filled setting
Enabling the
The box is unchecked by
rule
default.
Save
N/A
Undo
N/A
Back
N/A
Index skipping is used to reserve slots for new function insertion, when required.
Description
Enter a Application filter rule name. Enter a name that is easy for you to
understand.
This field is to specify the Source IP address.
Select Any to filter packets coming from any IP addresses.
Select Specific IP Address to filter packets coming from an IP address entered in
this field.
Select IP Range to filter packets coming from a specified range of IP address
entered in this field.
Select IP Address‐based Group to filter packets coming from a pre‐defined group
selected. Note: group must be pre‐defined before this selection become available.
Refer to System > Grouping > Host grouping. You may also access to create a group
by the Add Rule shortcut button. Setting done through the Add Rule button will
also appear in the Host grouping setting screen.
This field is to specify the Source MAC address.
Select Any to filter packets coming from any MAC addresses.
Select Specific MAC Address to filter packets coming from a MAC address entered
in this field.
Select MAC Address‐based Group to filter packets coming from a pre‐defined
group selected. Note: group must be pre‐defined before this selection become
available. Refer to System > Grouping > Host grouping. You may also access to
create a group by the Add Rule shortcut button. Setting done through the Add Rule
button will also appear in the Host grouping setting screen.
Check the boxes to activate the application filter functions you want on this rule.
Check the boxes to activate the application filter functions you want on this rule.
Check the boxes to activate the application filter functions you want on this rule.
Check the boxes to activate the application filter functions you want on this rule.
Apply Time Schedule to this rule, otherwise leave it as Always.
If the dropdown list is empty ensure Time Schedule is pre‐configured. Refer to
System > Scheduling setting.
Click Enable box to activate this rule then save the configuration.
Click the Save button to save the configuration
Click the Undo button to restore what you just configured back to the previous
setting. Please note that the restored setting may not be the factory default setting
but a retrieve of what was saved in the memory.
When the Back button is clicked the screen will return to the Application Filters
Configuration page.
168
Advertisement
Table of Contents
