Table of Contents
Advertisement
M2M Cellular Gateway
Create/Edit Managing Events Rules
Setup your Managing Event rules. It supports up to a maximum of 128 rules.
When Add button is applied, the Managing Event Configuration screen will appear.
Managing Event Configuration
Item
Value setting
Event
SMS (or SNMP Trap) by
default
Handlers
All box is unchecked by
default.
Index skipping is used to reserve slots for new function insertion, when required.
Specify the Event type (SMS, SNMP Trap, DI, or Modbus) and event code.
Select SMS and fill the message in the textbox to specify SMS Event;
Select SNMP Trap and fill the message in the textbox to specify SNMP Trap
Event;
Select DI and select profile from Digital Input (DI) Profile List to specify DI
Event;
Select Modbus and select profile from Modbus Definition to specify
Modbus Event.
Specify the related Handlers for the managing event.
Select Power Checkbox and select the handlers you want to specify Power
Handlers;
Select WAN Checkbox and select the handlers you want to specify WAN
Handlers ;
Select LAN&VLAN Checkbox and select the handlers you want to specify
LAN&VLAN Handlers;
Select WiFi Checkbox and select the handlers you want to specify WiFi
Handlers;
Select NAT Checkbox and select the handlers you want to specify NAT
Handlers;
Select Firewall Checkbox and select the handlers you want to specify
Firewall Handlers;
Select System Management Checkbox and select the handlers you want to
specify System Management Handlers;
Select System Related Checkbox and select the handlers you want to
specify System Related Handlers;
Select DO Checkbox and select the profile from Digital Output (DO) Profile
List to specify DO Handlers.
Description
326
Advertisement
Table of Contents
