Huawei Quidway S5700 Series Configuration Manual - Network Management page 248
Hide thumbs
Also See for Quidway S5700 Series:
- Hardware description (253 pages) ,
- Hardware installation and maintenance manual (183 pages) ,
- Quick configuration (74 pages)
Table of Contents
Advertisement
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management
l
l
l
l
Procedure
Step 1 Configure the IP addresses of the Switches.
Configure the IP address of each interface according to
# Configure the IP address of the VLANIF interface on Switch C.
<SwitchC> system-view
[SwitchC] vlan 10
[SwitchC-Vlan10] quit
[SwitchC] interface gigabitethernet 0/0/1
[SwitchC-GigabitEthernet0/0/1] port hybrid pvid vlan 10
[SwitchC-GigabitEthernet0/0/1] port hybrid untagged vlan 10
[SwitchC-GigabitEthernet0/0/1] quit
[SwitchC] interface vlanif 10
[SwitchC-Vlanif10]ip address 3.0.1.31 24
[SwitchC-Vlanif10]quit
# Configure the IP address of the VLANIF interface on Switch D.
<SwitchD> system-view
[SwitchD] vlan 10
[SwitchD-Vlan10] quit
[SwitchD] interface gigabitethernet 0/0/1
[SwitchD-GigabitEthernet0/0/1] port hybrid pvid vlan 10
[SwitchD-GigabitEthernet0/0/1] port hybrid untagged vlan 10
[SwitchD-GigabitEthernet0/0/1] quit
[SwitchD] interface vlanif 10
[SwitchD-Vlanif10] ip address 3.0.1.32 24
[SwitchD-Vlanif10] quit
# Configure the IP address of the VLANIF interface on Switch F.
<SwitchF> system-view
[SwitchF] vlan 10
[SwitchF-Vlan10] quit
[SwitchF] interface gigabitethernet 0/0/2
[SwitchF-GigabitEthernet0/0/2] port hybrid pvid vlan 10
[SwitchF-GigabitEthernet0/0/2] port hybrid untagged vlan 10
[SwitchF-GigabitEthernet0/0/2] quit
[SwitchF] interface vlanif 10
[SwitchF-Vlanif10] ip address 3.0.1.2 24
[SwitchF-Vlanif10] quit
[SwitchF] vlan 20
[SwitchF-Vlan20] quit
[SwitchF] interface gigabitethernet 0/0/1
[SwitchF-GigabitEthernet0/0/1] port hybrid pvid vlan 20
[SwitchF-GigabitEthernet0/0/1] port hybrid untagged vlan 20
[SwitchF-GigabitEthernet0/0/1] quit
[SwitchF] interface vlanif 20
[SwitchF-vlanif20] ip address 1.0.1.2 24
[SwitchF-vlanif20] quit
# Configure the IP address of the VLANIF interface on Switch A.
<SwitchA> system-view
[SwitchA] vlan 20
[SwitchA-Vlan20] quit
[SwitchA] interface gigabitethernet 0/0/1
[SwitchA-GigabitEthernet0/0/1] port hybrid pvid vlan 20
Issue 01 (2011-10-26)
IP address of each interface
IDs of VLANs to which the interfaces belong
Stratum count of the NTP master clock
Authentication key and key ID
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 NTP Configuration
Figure
4-4.
237
Advertisement
Table of Contents
