Huawei Quidway S5700 Series Configuration Manual - Network Management page 391
Hide thumbs
Also See for Quidway S5700 Series:
- Hardware description (253 pages) ,
- Configuring and troubleshooting (19 pages) ,
- Hardware installation and maintenance manual (183 pages)
Table of Contents
Advertisement
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management
2.
3.
4.
5.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
l
Procedure
Step 1 Configure a dynamic multi-hop PW.
Configure a dynamic multi-hop PW on the MPLS backbone network.
For the detailed configuration procedure, see "PWE3 Configuration" in the Quidway S5700
Series Ethernet Switches Configuration Guide - VPN.
Step 2 Configure a PWE3 Trace test of the multi-hop PW.
# Configure U-PE1.
<U-PE1> system-view
[U-PE1] nqa test-instance test pwe3trace
[U-PE1-nqa-test-pwe3trace] test-type pwe3trace
[U-PE1-nqa-test-pwe3trace] local-pw-id 100
[U-PE1-nqa-test-pwe3trace] local-pw-type ppp
[U-PE1-nqa-test-pwe3trace] label-type control-word
[U-PE1-nqa-test-pwe3trace] remote-pw-id 200
Step 3 Perform the test.
[U-PE1-nqa-test-pwe3trace] start now
Step 4 Verify the test result.
After running the display nqa history command on the PE device, you can see that the status
is successful.
[U-PE1-nqa-test-pwe3trace] display nqa history
NQA entry(test, pwe3trace)
history:
Index
1
2
3
4
5
6
7
8
9
Issue 01 (2011-10-26)
Configure the basic MPLS functions on the backbone network and set up an LSP tunnel.
Set up MPLS LDP peer relations between U-PE1 and S-PE, and between U-PE2 and S-
PE.
Create an MPLS L2VC connection between the two U-PEs.
Create a switching PW on the switching node S-PE.
Configure a PWE3 Trace test on the multi-hop PW on U-PE1.
L2VC IDs on U-PE1 and U-PE2, which must be different
MPLS LSR-IDs of U-PE1, S-PE, and U-PE2
IP address of the remote peer
Encapsulation type of the switching PW
Name and parameters of the PW template on U-PE devices
T/H/P
Response Status
1/1/1
1/1/2
1/1/3
1/2/1
1/2/2
1/2/3
1/3/1
1/3/2
1/3/3
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Address
4 success
10.1.1.2
5 success
10.1.1.2
3 success
10.1.1.2
6 success
20.1.1.2
6 success
20.1.1.2
6 success
20.1.1.2
6 success
30.1.1.2
6 success
30.1.1.2
6 success
30.1.1.2
6 NQA Configuration
Time
2006-9-30 9:33:3.301
2006-9-30 9:33:3.307
2006-9-30 9:33:3.311
2006-9-30 9:33:3.318
2006-9-30 9:33:3.324
2006-9-30 9:33:3.331
2006-9-30 9:33:3.318
2006-9-30 9:33:3.324
2006-9-30 9:33:3.331
380
Advertisement
Table of Contents
