Checking The Configuration - Huawei Quidway S5700 Series Configuration Manual - Network Management

Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management
Step 6 Run:
start
The NQA test is started.
Select the start mode as required because the startcommand has several forms.
l To perform the NQA test immediately, run the start now [ end { at [ yyyy/mm/dd ]
l To perform the NQA test at the specified time, run the start at [ yyyy/mm/dd ] hh:mm:ss
l To perform the NQA test after a certain delay period, run the start delay { seconds second
----End

6.18.3 Checking the Configuration

After configuring the ICMP jitter test, you can view the test result.
Prerequisite
The configurations of the ICMP Jitter Test function are complete.
Procedure
Step 1 Run the display nqa results [ test-instance admin-name test-name ] command to check results
on the NQA client.
----End
Example
If the ICMP jitter test succeeds, you can view the following information by running the display
nqa results command.
<Quidway> display nqa results test-instance admin icmpjitter
NQA entry(admin, icmpjitter) :testflag is inactive ,testtype is icmpjitter
1 . Test 1 result
Issue 01 (2011-10-26)
The percentage of the failed NQA tests is set.
hh:mm:ss | delay { seconds second | hh:mm:ss } | lifetime { seconds second | hh:mm:ss } } ]
command.
The test instance is started immediately.
[ end { at [ yyyy/mm/dd ] hh:mm:ss | delay { seconds second | hh:mm:ss } | lifetime
{ seconds second | hh:mm:ss } } ] command.
The test instance is started at a specified time.
| hh:mm:ss } [ end { at [ yyyy/mm/dd ] hh:mm:ss | delay { seconds second | hh:mm:ss } |
lifetime { seconds second | hh:mm:ss } } ] command.
The test instance is started after a certain delay.
NOTE
NQA test results cannot be displayed automatically on the terminal. You should run the display nqa
results command to check the test results.
The test is finished
SendProbe:60
Completion :success
OWD OverThresholds SD number:0
Min/Max/Avg/Sum RTT:1/144/12/709
NumOfRTT:60
Operation sequence errors number:0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ResponseProbe:60
RTD OverThresholds number:0
OWD OverThresholds DS number:0
RTT Square Sum:61007
Drop operation number:0
RTT Stats errors number:0
6 NQA Configuration
305