Example For Configuring The Http Test - Huawei Quidway S5700 Series Configuration Manual - Network Management

Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management
l

6.27.4 Example for Configuring the HTTP Test

Networking Requirements
As shown in
Figure 6-6 Networking diagram for configuring the HTTP test
Switch
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
Issue 01 (2011-10-26)
port hybrid untagged vlan 20
#
return
Configuration file of Switch C
#
sysname SwitchC
#
FTP server enable
#
vlan batch 20
#
interface Vlanif20
ip address 10.2.1.2 255.255.255.0
#
interface GigabitEthernet0/0/1
port hybrid pvid vlan 20
port hybrid untagged vlan 20
#
aaa
local-user user1 password cipher 3MQ*TZ,O3KCQ=^Q`MAF4<1!!
local-user user1 service-type ftp
local-user user1 ftp-directory flash:
#
ip route-static 10.1.1.0 255.255.255.0 10.2.1.1
#
return
Figure 6-6, Switch is connected to the HTTP server through a WAN.
10.1.1.2/24
GE0/0/1
VLANIF10
10.1.1.1/24
Configure the Switch as the NQA client.
Create and perform the HTTP test on the Switch to check whether the a connection between
the Switch and the HTTP server can be set up and to check the time for transferring a file
between them.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
HTTP Server
10.2.1.1/24
IP
Network
6 NQA Configuration
341