Huawei Quidway S5700 Series Configuration Manual - Network Management page 159

Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management
Networking Requirements
As shown in
the administrator switch of the cluster and other switches are member switches. The member ID
of Member-2 is 2 and the member ID of Member-3 is 3.
When Member-1, Member-2, and Member-3 are required to send packets to the SNMP host out
of the cluster, a connection can be set up between the SNMP host and member switches in NAT
or non-NAT mode.
Figure 3-7 Networking diagram of configuring devices in the HGMP cluster to access the
outside SNMP host (in non-NAT mode)
SFTP Server
Device
Administrator-1
Member-2
Issue 01 (2011-10-26)
Figure 3-7, all the Layer 2 switches belong to the same cluster. Administrator-1 is
NOTE
In this configuration example where the non-NAT mode is adopted, Member-3 accesses the SNMP host
(3.0.0.1/8).
FTP Server
2.0.0.1/8
2.0.0.2/8
1.0.0.2/8
GE0/0/1
GE0/0/1
Member-1
GE0/0/2
GE0/0/1
Member-3
MAC Address
0001-0001-0001
0003-0003-0003
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
IP/MPLS
core
GE0/0/1
GE0/0/3
GE0/0/2
Administrator-1
10.0.0.1/8
......
Member-2
10.0.0.4/8
Cluster
3 HGMP Configuration
NM station
3.0.0.1/8
Log station
4.0.0.1/8
GE0/0/1
Device MAC Address
Member-1 0002-0002-0002
Member-3 0004-0004-0004
148