Huawei Quidway S5700 Series Configuration Manual - Network Management page 74
Hide thumbs
Also See for Quidway S5700 Series:
- Hardware description (253 pages) ,
- Configuring and troubleshooting (19 pages) ,
- Hardware installation and maintenance manual (183 pages)
Table of Contents
Advertisement
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management
Figure 2-7 Configuring LLDP on the device that has a single neighbor
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
Procedure
Step 1 Enable global LLDP on SwitchA and SwitchB.
# Configure SwitchA.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] lldp enable
# Configure SwitchB.
<Quidway> system-view
[Quidway] sysname SwitchB
[SwitchB] lldp enable
Step 2 Enable SwitchA and SwitchB to process LLDP BPDUs.
# Configure SwitchA.
Issue 01 (2011-10-26)
Internet
10.10.10.1
GE0/0/1
GE0/0/1
10.10.10.2
Switch B
Enable global LLDP on SwitchA and SwitchB.
Enable SwitchA and SwitchB to process LLDP BPDUs.
Configure management addresses for SwitchA and SwitchB.
Enable the LLDP trap function on SwitchA and SwitchB.
Management address 10.10.10.1 for SwitchA and management address 10.10.10.2 for
SwitchB
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
NMS
Switch A
GE0/0/2
ME
2 LLDP Configuration
63
Advertisement
Table of Contents
