Huawei Quidway S5700 Series Configuration Manual - Network Management page 79
Hide thumbs
Also See for Quidway S5700 Series:
- Hardware description (253 pages) ,
- Configuring and troubleshooting (19 pages) ,
- Hardware installation and maintenance manual (183 pages)
Table of Contents
Advertisement
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management
Figure 2-8 Configuring LLDP on the device that has multiple neighbors
SwitchA
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
Data Preparation
To complete the configuration, you need the following data:
l
Procedure
Step 1 Enable global LLDP on SwitchA, SwitchB, and SwitchC.
# Configure SwitchA.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] lldp enable
# Configure SwitchB.
Issue 01 (2011-10-26)
SwitchD
SwitchE
10.10.10.1
LLDP interface
NMS: Network Management System
Enable global LLDP on SwitchA, SwitchB, and SwitchC.
Enable SwitchA, SwitchB, and SwitchC to process LLDP BPDUs.
Configure management addresses for SwitchA, SwitchB, and SwitchC.
Management addresses for SwitchA, SwitchB, and SwitchC
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
NMS
LLDPDU
10.10.10.2
SwitchB
2 LLDP Configuration
SwitchF
10.10.10.3
SwitchC
SNMP packet
LLDPDU packet
68
Advertisement
Table of Contents
