Example For Configuring The Jitter Test - Huawei Quidway S5700 Series Configuration Manual - Network Management

Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management
l
l

6.27.10 Example for Configuring the Jitter Test

Networking Requirements
As shown in
transmitting a packet from Switch A to Switch C. Switch A and Switch C synchronize the clock
from Switch B so that the test precision is improved.
Figure 6-12 Networking diagram for configuring the Jitter test
SwitchA
Issue 01 (2011-10-26)
Configuration file of Switch B
#
sysname SwitchB
vlan batch 100 110
#
interface Vlanif100
ip address 10.1.1.2 255.255.255.0
#
interface Vlanif110
ip address 10.2.1.1 255.255.255.0
#
interface GigabitEthernet0/0/1
port hybrid pvid vlan 100
port hybrid untagged vlan 100
#
interface GigabitEthernet0/0/2
port hybrid pvid vlan 110
port hybrid untagged vlan 110
#
return
Configuration file of Switch C
#
sysname SwitchC
#
vlan batch 110
#
interface Vlanif110
ip address 10.2.1.2 255.255.255.0
#
interface GigabitEthernet0/0/1
port hybrid pvid vlan 110
port hybrid untagged vlan 110
#
nqa-server udpecho 10.2.1.2 6000
#
ip route-static 10.1.1.0 255.255.255.0 10.2.1.1
#
return
Figure 6-12, the NQA Jitter test needs to be used to obtain the jitter time of
NOTE
For information about clock synchronization, see "NTP" in the Quidway S5700 Series Ethernet Switches
Feature Description - Network Management.
GE0/0/1 GE0/0/1
VLANIF100 VLANIF100
10.1.1.1/24 10.1.1.2/24
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
SwitchB
GE0/0/2
VLANIF110
VLANIF110
10.2.1.1/24
10.2.1.2/24
6 NQA Configuration
SwitchC
GE0/0/1
NQA Server
353