Sending Trap Messages When Test Failed - Huawei Quidway S5700 Series Configuration Manual - Network Management

Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management
l
l
NQA also supports the sending of trap messages to the NM station when the uni-directional
transmission delay or the round-trip transmission delay exceeds the threshold.
l
l
Trap messages carry information such as destination IP address, operation status, destination IP
address of the test packet, minimum RTT, maximum RTT and total RTT, number of sent probe
packets, number of received packets, RTT square sum, and time of the last successful probe.
Pre-configuration Tasks
Before configuring the trap function, complete the following tasks:
l
l
Data Preparation
To configure the trap function, you need the following data.
No.
1
2
3

6.25.2 Sending Trap Messages When Test Failed

A trap message is sent to the NMS when the transmission of NQA test packets fails.
Procedure
Step 1 Run:
system-view
Issue 01 (2011-10-26)
Trap message sent when an NQA test fails
It aims at checking whether the test fails.
If the number of the times that a test fails exceeds the limit, trap messages are sent to a
specified NM station.
Trap message sent when an NQA test is successful
It aims at checking whether the test is successful.
If Echo packets are received during an NQA test, trap messages are sent to a specified NM
station.
For all tests supporting traps, if the round-trip transmission delay exceeds the threshold and
the trap function is enabled, trap messages are sent to the NM station with the specified IP
address.
For all the Jitter tests, if the uni-directional transmission delay exceeds the threshold and
the trap function is enabled, trap messages are sent to the NM station with the specified IP
address.
Configuring routes between the NQA client and the NM station
Creating an NQA test and configuring related parameters correctly
Data
Administrator name and test name
NQA events that trigger the trap function
l (Optional) Number of test failures that trigger sending a trap message
l (Optional) Number of probe failures that trigger sending a trap message
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
328