Huawei Quidway S5700 Series Configuration Manual - Network Management page 150

Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management
Figure 3-6 Networking diagram of configuring devices in the HGMP cluster to access the
outside SNMP host (in NAT mode)
SFTP Server
Device
Administrator-1
Member-2
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
Data Preparation
To complete the configuration, you need the following data:
Issue 01 (2011-10-26)
FTP Server
2.0.0.1/8
2.0.0.2/8
GE0/0/1
1.0.0.2/8
GE0/0/1
GE0/0/1
Member-1
GE0/0/2
GE0/0/1
Member-3
10.0.0.4/8
MAC Address
0001-0001-0001
0003-0003-0003
Create a cluster and configure basic HGMP functions for the cluster according to the steps
described in Example for Configuring Basic HGMP Functions for a
Enable SNMP NAT on the administrator switch (The function is enabled by default.)
NOTE
Related configurations of cluster NAT must be performed on the administrator switch.
Assign an IP address to the SNMP host.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
IP/MPLS
core
GE0/0/3
GE0/0/2
Administrator-1
10.0.0.1/8
......
Member-2
Cluster
3 HGMP Configuration
NM station
3.0.0.1/8
Log station
4.0.0.1/8
GE0/0/1
Device MAC Address
Member-1 0002-0002-0002
Member-3 0004-0004-0004
Cluster.
139