Configuring The Ftp Download Test; Establishing The Configuration Task - Huawei Quidway S5700 Series Configuration Manual - Network Management

Hide thumbs Also See for Quidway S5700 Series:
Table of Contents

Advertisement

Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management
Example
Run the display nqa results command. If the following is displayed, it means that the test is
successful.
l
l
l
For the ICMP test, you can also view the minimum time, maximum time, and RTT(Round Trip
Time ).
<Quidway> display nqa results
NQA entry(admin, test) :testflag is inactive ,testtype is icmp
1 . Test 1 result

6.6 Configuring the FTP Download Test

This section describes how to configure a File Transfer Protocol (FTP) download test to check
the FTP download performance.

6.6.1 Establishing the Configuration Task

Before configuring an FTP download test, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the required data. This can help you complete
the configuration task quickly and accurately.
Applicable Environment
In an FTP download test, the local device functions as an NQA FTP client, intending to download
the specified file from an FTP server.
The test result contains statistics about each FTP phase, including the time to set up an FTP
control connection and the time to transport the data.
Pre-configuration Tasks
Before configuring the FTP download test, complete the following tasks:
l
l
Data Preparation
To configure the FTP download test, you need the following data.
Issue 01 (2011-10-26)
"testFlag is inactive"
"The test is finished"
"Completion:success"
The test is finished
Send operation times: 3
Completion:success
Attempts number:1
Disconnect operation number:0
System busy operation number:0
Operation sequence errors number:0
Destination ip address:10.112.58.3
Min/Max/Average Completion Time: 2/5/3
Sum/Square-Sum
Completion Time: 9/33
Last Good Probe Time: 2010-06-21 15:33:09.2
Lost packet ratio: 0 %
Configuring the FTP user name and password and the login directory
Configuring routes between the NQA FTP client and the FTP server
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Receive response times: 3
RTD OverThresholds number: 0
Drop operation number:0
Operation timeout number:0
Connection fail number:0
RTT Stats errors number:0
6 NQA Configuration
262

Advertisement

Table of Contents
loading

Table of Contents