Configuring The Ftp Upload Test Parameters - Huawei Quidway S5700 Series Configuration Manual - Network Management

Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management
In an FTP upload test, you can specify the file to be uploaded or the bytes to be uploaded. If
certain bytes are specified, the FTP client then automatically generates the test files for
uploading.
Pre-configuration Tasks
Before configuring the FTP upload test, complete the following tasks:
l
l
Data Preparation
To configure the FTP upload test, you need the following data.
No.
1
2
3
4
5
6

6.7.2 Configuring the FTP Upload Test Parameters

This part describes how to set parameters for the FTP upload test.
Context
Do as follows on the NQA client (FTP client):
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
nqa test-instance admin-name test-name
An NQA test instance is created and the test instance view is displayed.
Step 3 Run:
test-type ftp
The test type is set to FTP.
Issue 01 (2011-10-26)
Configuring the FTP user name and password and the login directory
Configuring routes between the NQA client and the FTP server
Data
Administrator name and test name
IP address of the FTP server
FTP user name and password
(Optional) Source IP address of the FTP operation and VPN instance name and source
and destination port numbers of the FTP operation
Name or size of the uploaded file
Start mode and end mode of the test
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
266