Huawei Quidway S5700 Series Configuration Manual - Network Management page 135

Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management
[Administrator-1] cluster
[Administrator-1-cluster] ip-pool 10.0.0.1 8
# Create a cluster named HUAWEI on the administrator switch.
[Administrator-1-cluster] build HUAWEI
[HUAWEI_0.Administrator-1-cluster]
After the previous configuration, check information about the cluster to which the device
belongs. You can find that the device name is changed, the cluster name is HUAWEI, and the
management VLAN ID is 10.
[HUAWEI_0.Administrator-1-cluster] display cluster
Cluster name:"HUAWEI"
Role:Administrator switch
management vlan id
Cluster multicast MAC address : 0180-c200-000a(default)
Cluster auto-join
Handshake timer:10 sec
Handshake hold-time:60 sec
IP pool:10.0.0.1/8
No logging host configured
No SNMP host configured
No FTP server configured
No SFTP server configured
cluster-member ftp-timeout: 300 sec(default)
Cluster SNMP NAT capability : enabled
Cluster FTP NAT capability : disabled
There are 1 member(s) in the cluster, and 0 of them are down.
On the administrator switch, check information about candidate switches, you can find all the
candidate switches and their types.
[HUAWEI_0.Administrator-1-cluster] display cluster candidates
MAC
0004-0004-0004
0003-0003-0003
0002-0002-0002
Step 6 Add member switches.
# Add all candidate switches to the cluster.
[HUAWEI_0.Administrator-1-cluster] auto-build
Collecting candidate list, please wait...
Candidate list:
Name
Member-1
Member-2
Member-3
Warning: Add all to cluster?(Y/N) y
Info: Cluster auto-build is complete.
Added 3 member(s) into the cluster successfully.
After the previous configuration, check information about the administrator switch and member
switches in the cluster on the administrator switch. You can find that all the member switches
are added to the cluster and in the Up state.
[HUAWEI_0.Administrator-1-cluster] display cluster members
The list of cluster member:
------------------------------------------------------------------------------
SN
Issue 01 (2011-10-26)
: 10
: disabled
HOP IP
2
1
1
NOTE
l Following steps can be performed only on the administrator switch.
l Take the mode of automatically adding member switches as an example. To add member switches
manually, see Adding a Member
Device Type
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
PLATFORM
S5700
S5700
S5700
Switch.
Hop MAC Address
1 0002-0002-0002
1 0003-0003-0003
2 0004-0004-0004
MAC Address Status Device Name
3 HGMP Configuration
DeviceType
S5700
S5700
S5700
124