Huawei Quidway S5700 Series Configuration Manual - Network Management page 31

Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management
Context
If a device is managed by multiple NM stations that use the same community name, note the
following points:
l
l
l
l
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
acl acl-number
A basic ACL is created to filter the NM station users that can manage the device.
Step 3 Run:
rule [ rule-id ] { deny | permit } source { source-ip-address source-wildcard |
any }
A rule is added to the ACL.
Step 4 Run:
quit
Return to the system view.
Step 5 Run:
snmp-agent mib-view { excluded | included } view-name oid-tree
A MIB view is created, and manageable MIB objects are specified.
By default, an NM station has rights to access the objects in the Viewdefault view (1.3.6.1).
l If a few MIB objects on a device or some objects in the current MIB view do not or no longer
l If a few MIB objects on the device or some objects in the current MIB view need to be
Step 6 Run:
snmp-agent community { read | write } { community-name | cipher community-name } [
mib-view view-name | acl acl-number ]
The NM station's access rights are specified.
l read needs to be configured in the command if the NM station administrator needs the read
Issue 01 (2011-10-26)
If all the NM stations that use the community name need to have rights to access the objects
in the Viewdefault view (1.3.6.1), skip the following steps.
If some of the NM stations that use the community name need to have rights to access the
objects in the Viewdefault view (1.3.6.1), skip Step 5.
If all the NM stations need to manage specified objects on the device, skip Steps 2, 3, and
4.
If some of the NM stations that use the community name need to manage specified objects
on the device, perform all the following steps.
need to be managed by the NM station, excluded needs to be specified in the related command
to exclude these MIB objects.
managed by the NM station, included needs to be specified in the related command to include
these MIB objects.
permission in the specified view in some cases. For example, a low-level administrator needs
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
*
1 SNMP Configuration
20