Huawei Quidway S5700 Series Configuration Manual - Network Management page 374
Hide thumbs
Also See for Quidway S5700 Series:
- Hardware description (253 pages) ,
- Configuring and troubleshooting (19 pages) ,
- Hardware installation and maintenance manual (183 pages)
Table of Contents
Advertisement
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management
1.
2.
Data Preparation
To complete the configuration, you need the following data:
l
Procedure
Step 1 Configure a reachable route between Switch A and Switch B.
The configuration details are not mentioned here.
Step 2 Configure an NQA test instance for Switch A.
# Enable the NQA client and configure the ICMP jitter test instance.
<RouterA> system-view
[RouterA] nqa test-instance admin icmpjitter
[RouterA-nqa-admin-icmpjitter] test-type icmpjitter
[RouterA-nqa-admin-icmpjitter] destination-address ipv4
Step 3 Start the test.
[RouterA-nqa-admin-icmpjitter] start now
Step 4 Check test results.
[RouterA-nqa-admin-icmpjitter] display nqa results test-instance admin icmpjitter
NQA entry(admin, icmpjitter) :testflag is inactive ,testtype is icmpjitter
1 . Test 1 result
----End
Issue 01 (2011-10-26)
Configure Switch A as the NQA client and create an ICMP jitter test instance on Switch
A.
Configure Switch B as the NQA server.
IP address of Switch B
The test is finished
SendProbe:60
Completion :success
OWD OverThresholds SD number:0
Min/Max/Avg/Sum RTT:1/3/1/65
NumOfRTT:60
Operation sequence errors number:0
System busy operation number:0
Min Positive SD:1
Max Positive SD:3
Positive SD Number:18
Positive SD Sum:22
Positive SD Square Sum :32
Min Negative SD:1
Max Negative SD:2
Negative SD Number:21
Negative SD Sum:22
Negative SD Square Sum :24
Min Delay SD:0
Max Delay SD:1
Delay SD Square Sum:4
Packet Loss SD:0
Packet Loss Unknown:0
Average of Jitter SD:1
jitter out value:0.5599658
NumberOfOWD:60
OWD SD Sum:4
ICPIF value: 0
TimeStamp unit: ms
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10.1.1.2
ResponseProbe:60
RTD OverThresholds number:0
OWD OverThresholds DS number:0
RTT
Square Sum:77
Drop operation number:0
RTT Stats errors number:0
Operation timeout number:0
Min Positive DS:1
Max Positive DS:1
Positive DS Number:15
Positive DS Sum:15
Positive DS Square Sum :15
Min Negative DS:1
Max Negative DS:1
Negative DS Number:14
Negative DS Sum:14
Negative DS Square Sum :14
Min Delay DS:0
Max Delay DS:1
Delay DS Square Sum:1
Packet Loss DS:0
Average of Jitter:1
Average of Jitter DS:1
jitter in value:0.3574005
Packet Loss Ratio: 0%
OWD DS Sum:1
MOS-CQ value: 0
6 NQA Configuration
363
Advertisement
Table of Contents
