Huawei Quidway S5700 Series Configuration Manual - Network Management page 348
Hide thumbs
Also See for Quidway S5700 Series:
- Hardware description (253 pages) ,
- Configuring and troubleshooting (19 pages) ,
- Hardware installation and maintenance manual (183 pages)
Table of Contents
Advertisement
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management
1.
2.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
Procedure
Step 1 Configure the IP addresses of Switch A and Switch B. The configuration details are not
mentioned here.
Step 2 Configure Switch B as the FTP server.
<SwitchB> system-view
[SwitchB] ftp server enable
[SwitchB] aaa
[SwitchB-aaa] local-user user1 password cipher hello
[SwitchB-aaa] local-user user1 service-type ftp
[SwitchB-aaa] local-user user1 ftp-directory flash:
[SwitchB-aaa] quit
Step 3 Configure an NQA FTP test on Switch A.
<SwitchA> system-view
[SwitchA] nqa test-instance admin ftp
[SwitchA-nqa-admin-ftp] test-type ftp
[SwitchA-nqa-admin-ftp] destination-address ipv4 10.1.1.2
[SwitchA-nqa-admin-ftp] source-address ipv4 10.1.1.1
[SwitchA-nqa-admin-ftp] ftp-operation get
[SwitchA-nqa-admin-ftp] ftp-username user1
[SwitchA-nqa-admin-ftp] ftp-password hello
[SwitchA-nqa-admin-ftp] ftp-filename test.txt
Step 4 Perform the test.
[SwitchA-nqa-admin-ftp] start now
Step 5 Verify the test result.
[SwitchA-nqa-admin-ftp] display nqa results test-instance admin ftp
NQA entry(admin, ftp) :testflag is inactive ,testtype is
1 . Test 1 result
----End
Issue 01 (2011-10-26)
Configure Switch A as the NQA client.
Create and perform the FTP test on Switch A to check whether a connection between
Switch A and the FTP server can be set up and to check the time for downloading a file
from the FTP server.
IP address of the FTP server
Source IP address for the test
FTP user name and password
Operation file of the FTP test
The test is finished
SendProbe:1
Completion :success
MessageBodyOctetsSum: 448
Operation timeout number: 0
Drop operation number:0
CtrlConnTime Min/Max/Average: 438/438/438
DataConnTime Min/Max/Average: 218/218/218
SumTime Min/Max/Average: 656/656/656
Average RTT:656
Lost packet ratio:0 %
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ftp
ResponseProbe:1
RTD OverThresholds number: 0
Stats errors number: 0
System busy operation number:0
Disconnect operation number: 0
6 NQA Configuration
337
Advertisement
Table of Contents
