Huawei Quidway S5700 Series Configuration Manual - Network Management page 170

Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management
Figure 3-8 Networking diagram of configuring the batch distribution function for an HGMP
cluster
SFTP Server
Device
Administrator-1
Member-2
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
Issue 01 (2011-10-26)
FTP Server
2.0.0.1/8
2.0.0.2/8
GE0/0/1
1.0.0.2/8
GE0/0/1
GE0/0/1
Member-1
GE0/0/2
GE0/0/1
Member-3
10.0.0.4/8
MAC Address
0001-0001-0001
0003-0003-0003
Create a cluster according to the steps described in
HGMP Functions for a
3.6.1 Example for Configuring Basic HGMP Functions for a Cluster
NOTE
l Configure the interconnection of FTP servers and devices in and out of the HGMP cluster in
NAT or non-NAT mode. The following takes the configuration in NAT mode as an example.
l If the system software, patch files, or configuration files, batch distribution can be distributed in
batches without accessing the FTP server out of the cluster, you can skip this step.
Configure batch distribution on the administrator switch.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
IP/MPLS
core
GE0/0/3
GE0/0/2
Administrator-1
10.0.0.1/8
......
Member-2
Cluster
Cluster.
3 HGMP Configuration
NM station
3.0.0.1/8
Log station
4.0.0.1/8
GE0/0/1
Device MAC Address
Member-1 0002-0002-0002
Member-3 0004-0004-0004
3.6.1 Example for Configuring Basic
159