Configuring The Ftp Upload Test; Establishing The Configuration Task - Huawei Quidway S5700 Series Configuration Manual - Network Management
Hide thumbs
Also See for Quidway S5700 Series:
- Hardware description (253 pages) ,
- Hardware installation and maintenance manual (183 pages) ,
- Quick configuration (74 pages)
Table of Contents
Advertisement
Quidway S5700 Series Ethernet Switches
Configuration Guide - Network Management
Prerequisite
The configurations of the FTP Download Test function are complete.
Context
Procedure
Step 1 Run the display nqa results [ test-instance admin-name test-name ] command to view the test
results on the NQA client.
----End
Example
Run the display nqa results command. If the test is successful, the following is displayed.
l
l
l
<Quidway> display nqa results
NQA entry(admin, ftp) :testflag is inactive ,testtype is ftp
1 . Test 1 result
6.7 Configuring the FTP Upload Test
This section describes how to configure an FTP upload test to check the FTP upload performance.
6.7.1 Establishing the Configuration Task
Before configuring an FTP upload test, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the required data. This can help you complete
the configuration task quickly and accurately.
Applicable Environment
In an FTP upload test, the local device functions as an FTP client, intending to upload the
specified file to an FTP server.
The test result contains the statistics about each FTP phase, including the time to set up an FTP
control connection and the time to transport the data.
Issue 01 (2011-10-26)
NOTE
NQA test results cannot be displayed automatically on a terminal. You must run the display nqa results
command to view test results. By the default, the command output contains the records about only the last
five tests.
"CtrlConnTime"
"DataConnTime"
"SumTime"
The test is finished
SendProbe:1
Completion :success
MessageBodyOctetsSum: 448
Operation timeout number: 0
Drop operation number:0
CtrlConnTime Min/Max/Average: 438/438/438
DataConnTime Min/Max/Average: 218/218/218
SumTime Min/Max/Average: 656/656/656
Average RTT:380
Lost packet ratio: 0 %
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 NQA Configuration
ResponseProbe:1
RTD OverThresholds number: 0
Stats errors number: 0
System busy operation number:0
Disconnect operation number: 0
265
Advertisement
Table of Contents
