Gateway And Ip-To-Ip Parameters; Fax And Modem Parameters - AudioCodes Mediant 600 User Manual

Parameter
[RTCPXREscIP]
Web: RTCP XR Report Mode
EMS: Report Mode
[RTCPXRReportMode]

52.11 Gateway and IP-to-IP Parameters

52.11.1 Fax and Modem Parameters

The fax and modem parameters are described in the table below.
Parameter
Web: Fax Transport Mode
EMS: Transport Mode
[FaxTransportMode]
Web: V.21 Modem Transport
Type
EMS: V21 Transport
[V21ModemTransportType]
Web: V.22 Modem Transport
Type
EMS: V22 Transport
[V22ModemTransportType]
Web: V.23 Modem Transport
Type
EMS: V23 Transport
[V23ModemTransportType]
Web: V.32 Modem Transport
Type
EMS: V32 Transport
[V32ModemTransportType]
User's Manual
address or as a domain name.
Determines whether RTCP XR reports are sent to the Event State
Compositor (ESC) and defines the interval at which they are sent.

[0] Disable = (Default) RTCP XR reports are not sent to the
ESC.

[1] End Call = RTCP XR reports are sent to the ESC at the end
of each call.

[2] End Call & Periodic = RTCP XR reports are sent to the ESC
at the end of each call and periodically according to the
RTCPInterval parameter.
Fax and Modem Parameters
Determines the fax transport mode used by the device.

[0] Disable = transparent mode

[1] T.38 Relay (default)

[2] Bypass

[3] Events Only
Note: This parameter is overridden by the parameter IsFaxUsed. If
the parameter IsFaxUsed is set to 1 (T.38 Relay) or 3 (Fax
Fallback), then FaxTransportMode is always set to 1 (T.38 relay).
Determines the V.21 modem transport type.

[0] Disable = (Default) Disable (Transparent)

[2] Enable Bypass

[3] Events Only = Transparent with Events
Note: This parameter can also be configured in an IP Profile.
Determines the V.22 modem transport type.

[0] Disable = Disable (Transparent)

[2] Enable Bypass (default)

[3] Events Only = Transparent with Events
Note: This parameter can also be configured in an IP Profile.
Determines the V.23 modem transport type.

[0] Disable = Disable (Transparent)

[2] Enable Bypass (default)

[3] Events Only = Transparent with Events
Note: This parameter can also be configured in an IP Profile.
Determines the V.32 modem transport type.

[0] Disable = Disable (Transparent)

[2] Enable Bypass (default)
704
Mediant 600 & Mediant 1000
Description
Description
Document #: LTRT-83313