Cdr Field Description; Cdr Fields For Gateway/Ip-To-Ip Application - AudioCodes Mediant 600 User Manual

User's Manual

46.2.2 CDR Field Description

This section describes the CDR fields that are generated by the device.

46.2.2.1 CDR Fields for Gateway/IP-to-IP Application

The CDR fields for the Gateway / IP-to-IP application are listed in the table below.
Field Name
GWReportType
Cid
SessionId
Trunk
BChan
ConId
TG
EPTyp
Orig
SourceIp
DestIp
Version 6.6
CDR Fields for Gateway/IP-to-IP Application
Report type:

CALL_START

CALL_CONNECT

CALL_END
Port number
SIP session identifier
Physical trunk number
Note: This field is applicable only to the Gateway application.
Selected B-channel
Note: This field is applicable only to the Gateway application.
SIP conference ID
Note: This field is applicable only to the Gateway application.
Trunk Group ID
Note: This field is applicable only to the Gateway application.
Endpoint type:

FXO

FXS

EANDM

ISDN

CAS

DAA

IPMEDIA

NETANN

STREAMING

TRANSPARENT

MSCML

VXML

IP2IP
Call originator:

LCL (Tel side)

RMT (IP side)
Source IP address
Destination IP address
46. Reporting Information to External Party
Description
565 Mediant 600 & Mediant 1000