AudioCodes Mediant 600 User Manual page 234

Parameter
[MessageManipulation
s_ManSetID]
Matching Characteristics
Message Type
[MessageManipulation
s_MessageType]
Condition
[MessageManipulation
s_Condition]
Operation
Action Subject
[MessageManipulation
s_ActionSubject]
Action Type
[MessageManipulation
s_ActionType]
Action Value
[MessageManipulation
s_ActionValue]
User's Manual
Manipulation Set ID is used to assign the manipulation rules to an IP
Group (in the IP Group table) for inbound and/or outbound messages.
The valid value is 0 to 19. The default is 0.
Defines the SIP message type that you want to manipulate.
The valid value is a string denoting the SIP message.
For example:

Empty = rule applies to all messages

Invite = rule applies to all INVITE requests and responses

Invite.Request = rule applies to INVITE requests

Invite.Response = rule applies to INVITE responses

subscribe.response.2xx = rule applies to SUBSCRIBE confirmation
responses
Note: Currently, SIP 100 Trying messages cannot be manipulated.
Defines the condition that must exist for the rule to apply.
The valid value is a string.
For example:

header.from.url.user== '100' (indicates that the user part of the From
header must have the value "100")

header.contact.param.expires > '3600'

header.to.url.host contains 'domain'

param.call.dst.user != '100'
Defines the SIP header upon which the manipulation is performed.
Defines the type of manipulation.

[0] Add (default) = adds new header/param/body (header or
parameter elements).

[1] Remove = removes header/param/body (header or parameter
elements).

[2] Modify = sets element to the new value (all element types).

[3] Add Prefix = adds value at the beginning of the string (string
element only).

[4] Add Suffix = adds value at the end of the string (string element
only).

[5] Remove Suffix = removes value from the end of the string (string
element only).

[6] Remove Prefix = removes value from the beginning of the string
(string element only).
Defines a value (string) that you want to use in the manipulation.
The syntax is as follows:

string/<message-element>/<call-param> +

string/<message-element>/<call-param>
For example:

'itsp.com'

header.from.url.user
234
Mediant 600 & Mediant 1000
Description
Document #: LTRT-83313