To configure static IP routing:
1.
Open the IP Routing Table page (Configuration tab > VoIP menu > Network
submenu > IP Routing Table).
2.
In the Add a new table entry table, add a new static routing rule according to the
parameters described in the table below.
3.
Click Add New Entry; the new routing rule is added to the IP routing table.
To delete a routing rule from the table, select the 'Delete Row' check box corresponding to
the required routing rule, and then click Delete Selected Entries.
Notes:
Parameter
Destination IP Address
[StaticRouteTable_Destinatio
n]
Prefix Length
[StaticRouteTable_PrefixLen
gth]
User's Manual
Figure 11-4: IP Routing Table Page
•
You can delete only inactive routing rules.
•
The IP Routing table can also be configured using the table ini file
parameter, StaticRouteTable.
IP Routing Table Description
Defines the IP address of the destination host/network. The
destination can be a single host or a whole subnet, depending on
the Prefix Length configured for this routing rule.
Defines the Classless Inter-Domain Routing (CIDR)-style
representation of a dotted-decimal subnet notation, of the
destination host/network. The CIDR-style representation uses a
suffix indicating the number of bits that are set in the dotted-
decimal format. For example, 16 is synonymous with subnet
255.255.0.0.
Description
120
Mediant 600 & Mediant 1000
Document #: LTRT-83313