AudioCodes Mediant 600 User Manual page 304

Parameter
EMS: Number Of Stripped
Digits
[RemoveFromRight]
Web: Prefix to Add
EMS: Prefix/Suffix To Add
[Prefix2Add]
Web: Suffix to Add
EMS: Prefix/Suffix To Add
[Suffix2Add]
Web/EMS: Number of
Digits to Leave
[LeaveFromRight]
Web: NPI
EMS: Number Plan
[NumberPlan]
Web: TON
EMS: Number Type
[NumberType]
Web: Presentation
EMS: Is Presentation
Restricted
[IsPresentationRestricted
]
User's Manual
5551234, the new phone number is 5551.
Defines the number or string that you want added to the front of the
telephone number. For example, if you enter 9 and the phone number
is 1234, the new number is 91234.
Defines the number or string that you want added to the end of the
telephone number. For example, if you enter 00 and the phone
number is 1234, the new number is 123400.
Defines the number of digits that you want to keep from the right of
the phone number. For example, if you enter 4 and the phone number
is 00165751234, then the new number is 1234.
Defines the Numbering Plan Indicator (NPI).

[0] Unknown (default)

[9] Private

[1] E.164 Public

[-1] Not Configured = value received from PSTN/IP is used
Notes:

This parameter is applicable only to number manipulation tables
for IP-to-Tel calls.

NPI can be used in the SIP Remote-Party-ID header by using the
EnableRPIHeader and AddTON2RPI parameters.

For more information on available NPI/TON values, see
Numbering Plans and Type of Number on page 321.
Defines the Type of Number (TON).

If you selected 'Unknown' for the NPI, you can select Unknown [0].

If you selected 'Private' for the NPI, you can select Unknown [0],
Level 2 Regional [1], Level 1 Regional [2], PISN Specific [3] or
Level 0 Regional (Local) [4].

If you selected 'E.164 Public' for the NPI, you can select Unknown
[0], International [1], National [2], Network Specific [3], Subscriber
[4] or Abbreviated [6].
The default is 'Unknown'.
Notes:

This parameter is applicable only to number manipulation tables
for IP-to-Tel calls.

TON can be used in the SIP Remote-Party-ID header by using the
EnableRPIHeader and AddTON2RPI parameters.

For more information on available NPI/TON values, see
Numbering Plans and Type of Number on page 321.
Enables caller ID.

Not Configured = Privacy is determined according to the Caller ID
table (see Configuring Caller Display Information on page 396).

[0] Allowed = Sends Caller ID information when a call is made
using these destination/source prefixes.

[1] Restricted = Restricts Caller ID information for these prefixes.
Notes:

This field is applicable only to number manipulation tables for
source phone number manipulation.
304
Mediant 600 & Mediant 1000
Description
Document #: LTRT-83313