AudioCodes Mediant 600 User Manual page 656

Parameter
[ProxyIP]
Proxy Set Table
Web: Proxy Set Table
EMS: Proxy Set
[ProxySet]
Registrar Parameters
Web: Enable Registration
EMS: Is Register Needed
[IsRegisterNeeded]
Web/EMS: Registrar
Name
[RegistrarName]
User's Manual
name/FQDN). Each Proxy Set can be defined with a transport type
(UDP, TCP, or TLS). The format of this parameter is as follows:
[ProxyIP]
FORMAT ProxyIp_Index = ProxyIp_IpAddress, ProxyIp_TransportType,
ProxyIp_ProxySetId;
[\ProxyIP]
For example:
ProxyIp 0 = 10.33.37.77, -1, 0;
ProxyIp 1 = 10.8.8.10, 0, 2;
ProxyIp 2 = 10.5.6.7, -1, 1;
Notes:

To assign various attributes (such as Proxy Load Balancing) per
Proxy Set ID, use the parameter ProxySet.

For a description of this table, see 'Configuring Proxy Sets Table' on
page 219.
This table parameter configures the Proxy Set ID table. It is used in
conjunction with the ProxyIP table ini file parameter, which defines the
IP addresses per Proxy Set ID.
The ProxySet table ini file parameter defines additional attributes per
Proxy Set ID. This includes, for example, Proxy keep-alive and load
balancing and redundancy mechanisms (if a Proxy Set contains more
than one proxy address).
The format of this parameter is as follows:
[ProxySet]
FORMAT ProxySet_Index = ProxySet_EnableProxyKeepAlive,
ProxySet_ProxyKeepAliveTime, ProxySet_ProxyLoadBalancingMethod,
ProxySet_IsProxyHotSwap, ProxySet_SRD,
ProxySet_ClassificationInput, ProxySet_ProxyRedundancyMode;
[\ProxySet]
For example:
ProxySet 0 = 0, 60, 0, 0, 0, , 1;
ProxySet 1 = 1, 60, 1, 0, 1, , 0;
Notes:

For configuring the Proxy Set IDs and their IP addresses, use the
parameter ProxyIP.

For a description of this table, see 'Configuring Proxy Sets Table' on
page 219.
Enables the device to register to a Proxy/Registrar server.

[0] Disable = (Default) The device doesn't register to Proxy/Registrar
server.

[1] Enable = The device registers to Proxy/Registrar server when the
device is powered up and at every user-defined interval (configured
by the parameter RegistrationTime).
Note: The device sends a REGISTER request for each channel or for
the entire device (according to the AuthenticationMode parameter).
Defines the Registrar domain name. If specified, the name is used as
the Request-URI in REGISTER messages. If it isn't specified (default),
the Registrar IP address, or Proxy name or IP address is used instead.
The valid range is up to 100 characters.
656
Mediant 600 & Mediant 1000
Description
Document #: LTRT-83313