AudioCodes Mediant 600 User Manual page 659

User's Manual
Parameter
Web: Set Out-Of-Service
On Registration Failure
EMS: Set OOS On
Registration Fail
[OOSOnRegistrationFail
]
[UnregistrationMode]
Web/EMS: Add Empty
Authorization Header
[EmptyAuthorizationHea
der]
Version 6.6

[3] Per FXS = Registration and authentication for FXS endpoints.
Enables setting the endpoint, trunk, or entire device (i.e., all endpoints)
to out-of-service if registration fails.

[0] Disable (default)

[1] Enable
If the registration is per endpoint (i.e., AuthenticationMode is set to 0) or
per Account (see Configuring Trunk Group Settings on page 293) and a
specific endpoint/Account registration fails (SIP 4xx or no response),
then that endpoint is set to out-of-service until a success response is
received in a subsequent registration request. When the registration is
per the entire device (i.e., AuthenticationMode is set to 1) and
registration fails, all endpoints are set to out-of-service. If all the
Accounts of a specific Trunk Group fail registration and if the Trunk
Group comprises a complete trunk, then the entire trunk is set to out-of-
service.
Note: The out-of-service method is configured using the
FXSOOSBehavior parameter.
Enables the device to perform explicit unregisters.

[0] Disable (default)

[1] Enable = The device sends an asterisk ("*") value in the SIP
Contact header, instructing the Registrar server to remove all
previous registration bindings. The device removes SIP User Agent
(UA) registration bindings in a Registrar, according to RFC 3261.
Registrations are soft state and expire unless refreshed, but they can
also be explicitly removed. A client can attempt to influence the
expiration interval selected by the Registrar. A UA requests the
immediate removal of a binding by specifying an expiration interval
of "0" for that contact address in a REGISTER request. UA's should
support this mechanism so that bindings can be removed before
their expiration interval has passed. Use of the "*" Contact header
field value allows a registering UA to remove all bindings associated
with an address-of-record (AOR) without knowing their precise
values.
Note: The REGISTER-specific Contact header field value of "*" applies
to all registrations, but it can only be used if the Expires header field is
present with a value of "0".
Enables the inclusion of the SIP Authorization header in initial
registration (REGISTER) requests sent by the device.

[0] Disable (default)

[1] Enable
The Authorization header carries the credentials of a user agent (UA) in
a request to a server. The sent REGISTER message populates the
Authorization header with the following parameters:

username - set to the value of the private user identity

realm - set to the domain name of the home network

uri - set to the SIP URI of the domain name of the home network

nonce - set to an empty value

response - set to an empty value
For example:
659
52. Configuration Parameters Reference
Description
Mediant 600 & Mediant 1000