Telnet Parameters; Snmp Parameters - AudioCodes Mediant 600 User Manual

Voip media gateways analog & digital lines
Hide thumbs Also See for Mediant 600:
Table of Contents

Advertisement

User's Manual

52.2.3 Telnet Parameters

The Telnet parameters are described in the table below.
Parameter
Web: Embedded Telnet
Server
EMS: Server Enable
[TelnetServerEnable]
Web: Telnet Server TCP
Port
EMS: Server Port
[TelnetServerPort]
Web: Telnet Server Idle
Timeout
EMS: Server Idle
Disconnect
[TelnetServerIdleDisconn
ect]

52.2.4 SNMP Parameters

The SNMP parameters are described in the table below.
Parameter
Web: Enable SNMP
[DisableSNMP]
[SNMPPort]
[ChassisPhysicalAlias]
[ChassisPhysicalAssetID]
Version 6.6
Telnet Parameters
Enables the device's embedded Telnet server. Telnet is disabled by
default for security.
[0] Disable (default)
[1] Enable Unsecured
[2] Enable Secured (SSL)
Note: Only the primary Web User Account (which has Security
Administration access level) can access the device using Telnet (see
'Configuring Web User Accounts' on page 64).
Defines the port number for the embedded Telnet server.
The valid range is all valid port numbers. The default port is 23.
Defines the timeout (in minutes) for disconnection of an idle Telnet
session. When set to zero, idle sessions are not disconnected.
The valid range is any value. The default is 0.
Note: For this parameter to take effect, a device reset is required.
SNMP Parameters
Enables SNMP.
[0] Enable = (Default) SNMP is enabled.
[1] Disable = SNMP is disabled and no traps are sent.
Defines the device's local (LAN) UDP port used for SNMP
Get/Set commands.
The range is 100 to 3999. The default port is 161.
Note: For this parameter to take effect, a device reset is required.
Defines the 'alias' name object for the physical entity as specified
by a network manager, and provides a non-volatile 'handle' for
the physical entity.
The valid range is a string of up to 255 characters.
Defines the user-assigned asset tracking identifier object for the
device's chassis as specified by an EMS, and provides non-
volatile storage of this information.
The valid range is a string of up to 255 characters.
623
52. Configuration Parameters Reference
Description
Description
Mediant 600 & Mediant 1000

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mediant 1000

Table of Contents