Standalone Survivability Parameters - AudioCodes Mediant 600 User Manual

User's Manual
Parameter
[MSLDAPPrivateNumAttr
ibuteName]
[MSLDAPDisplayNameAt
tributeName]
[MSLDAPPrimaryKey]
[MSLDAPSecondaryKey]
LDAP Cache Service
[LDAPCacheEnable]
LDAP Cache Entry
Timeout
[LDAPCacheEntryTimeo
ut]
LDAP Cache Entry
Removal Timeout
[LDAPCacheEntryRemov
alTimeout]

52.14 Standalone Survivability Parameters

The Stand-alone Survivability (SAS) parameters are described in the table below.
Parameter
Web: Enable SAS
EMS: Enable
[EnableSAS]
Version 6.6
Defines the name of the attribute that represents the user's private
number in the AD. If this value equals the value of the
MSLDAPPrimaryKey or MSLDAPSecondaryKey parameter, then the
device queries the AD for the destination number in this private
attribute name; otherwise, this parameter is not used as a search
key.
The default is "msRTCSIP-PrivateLine".
Defines the attribute name that represents the Calling Name in the
AD for LDAP queries based on calling number.
The valid value is a string of up to 49 characters. The default is
"displayName".
Defines the name of the attribute used as a query search key for the
destination number in the AD. This is used instead of the "PBX"
attribute name (configured by the MSLDAPPBXNumAttributeName
parameter).
The default is not configured.
Defines the name of the attribute used as the second query search
key for the destination number in the AD, if the primary search key or
PBX search is not found.
Enables the LDAP cache service.

[0] Disable (default)

[1] Enable
Notes:

For this parameter to take effect, a device reset is required.

For more information on LDAP caching, see 'Configuring the
Device's LDAP Cache' on page 194.
Defines the duration (in minutes) that an entry in the LDAP cache is
valid. If the timeout expires, the cached entry is only used if there is
no connectivity with the LDAP server.
The default is 1200.
Defines the duration (in hours) after which the LDAP entry is
removed from the cache.
The default is 0.
SAS Parameters
Enables the Stand-Alone Survivability (SAS) feature.

[0] Disable (default)

[1] Enable
When enabled, the device receives the registration requests from
different SIP entities in the local network and then forwards them to the
821
52. Configuration Parameters Reference
Description
Description
Mediant 600 & Mediant 1000