AudioCodes Mediant 600 User Manual page 827

User's Manual
Parameter
Web: Enable Voice
Streaming
[EnableVoiceStreaming]
[VoiceStreamUploadMet
hod]
[VoiceStreamUploadPos
tURI]
[APSEnabled]
Web: NetAnn
Announcement ID
[NetAnnAnncID]
Web: MSCML ID
[MSCMLID]
Version 6.6
(since the reservation is done per DSP device and not per DSP
channel).

By default, the MPM module is set to the maximum value of IPM
channels, therefore, there is no need to define it.

By default, a digital module (i.e., TRUNKS module) is set to 0 IPM
channels.

For DSP utilization options, see DSP Channel Resources on page
181.
Enables the HTTP Voice Streaming application (play/record).

[0] Disable (default)

[1] Enable
Note: For this parameter to take effect, a device reset is required.
Defines the HTTP request type for loading the voice stream to the file
server.

[0] = POST (default)

[1] = PUT
Notes:

For this parameter to take effect, a device reset is required.

This parameter is applicable only to MSCML recording.
Defines the URI used on the POST request to upload voice data from
the media server to a Web server.
Note: For this parameter to take effect, a device reset is required.
Determines the Voice Prompt index reference. This parameter must
always be set to 0 (disabled).

[0] = APS disabled. Local Voice Prompts file is used. An audio
reference in a play request (such as http://localhost/0) indicates
that the Voice Prompt at index 0 in the Voice Prompts file is
played.

[1] = (Default) APS enabled. An audio reference (such as
http://localhost/99) indicates that the audio segment provisioned on
the APS with segment ID 99 is played.
Notes: For this parameter to take effect, a device reset is required.
Defines the NetAnn identification string (up to 16 characters) for
playing an announcement using the NetAnn interface. The application
server sends a regular SIP INVITE message with a SIP URI that
includes this identifier string and a "play=" parameter that identifies
the necessary announcement. The default is 'annc'.
Example 1: INVITE sip: annc@10.2.3.4;play=http://localhost/1.
Example 2: INVITE sip:
annc@10.2.3.4;play=http://10.2.3.4/Annc/ello.wav.
Defines the Media Server Control Markup Language (MSCML)
identification string (up to 16 characters). To start an MSCML session,
the application server sends a regular SIP INVITE message with a
SIP URI that includes this string. The default is 'ivr'.
For example: INVITE sip:ivr@10.2.3.4
Subsequent INFO messages carry the requests and responses.
827
52. Configuration Parameters Reference
Description
Mediant 600 & Mediant 1000