AudioCodes Mediant 600 User Manual page 559

User's Manual
Column Name
Quality Status
Quality Info.
DNS Status
Version 6.6

Fail = Remote side doesn't respond.

Init = Connectivity queries not started (e.g., IP address not resolved).

Disable = The connectivity option is disabled, i.e., parameter 'Alt Routing
Tel to IP Mode' (AltRoutingTel2IPMode ini) is set to 'None' or 'QoS'.
Determines the QoS (according to packet loss and delay) of the IP address.

Unknown = Recent quality information isn't available.

OK

Poor
Notes:

This parameter is applicable only if the parameter 'Alt Routing Tel to IP
Mode' is set to 'QoS' or 'Both' (AltRoutingTel2IPMode = 2 or 3).

This parameter is reset if no QoS information is received for 2 minutes.
Displays QoS information: delay and packet loss, calculated according to
previous calls.
Notes:

This parameter is applicable only if the parameter 'Alt Routing Tel to IP
Mode' is set to 'QoS' or 'Both' (AltRoutingTel2IPMode = 2 or 3).

This parameter is reset if no QoS information is received for 2 minutes.
DNS status can be one of the following:

DNS Disable

DNS Resolved

DNS Unresolved
Description
559
45. VoIP Status
Mediant 600 & Mediant 1000